Pwdx
FilmDownloadSupport
简体中文

Here to help.

Try new versions early

Join the Pwdx public beta on TestFlight to try new versions before they reach the App Store. Beta and App Store versions share the same iCloud vault. Betas can be less stable, so make sure your recovery code is saved offline before you join. Report problems in the app under Settings → Contact support.

You need Apple’s TestFlight app on your iPhone, iPad or Mac. Places are limited; when the beta is full, the link stops accepting new testers for a while.

Join the TestFlight beta

Sync and recovery

Use the same Apple account on all your devices and turn on iCloud Drive and iCloud Keychain. Your vault and its protected keys can arrive at different times. If a new device cannot open your vault yet, check your connection and these settings, then allow time for the keys to sync or enter your full recovery code when prompted. Keep your recovery code somewhere safe offline. Avoid deleting or recreating your vault to fix a sync problem. If you have no usable synced keys, no device that can still unlock the vault, and no valid recovery code, support cannot decrypt your vault for you.

Replacing or losing your recovery code

To replace your recovery code, open Settings → Generate a new recovery code in Pwdx. You must verify your identity with Face ID, Touch ID or your device passcode, enter your current recovery code, and confirm the change. Five incorrect code attempts lock the code verification step for 30 seconds. Save the new code offline immediately; the old code stops working when the new one is generated. You cannot generate a replacement without the original code, even on a device that can still unlock your vault. You can keep using that device, so do not delete the app. On a new device, allow time for iCloud Keychain to sync through the same Apple account. Support cannot retrieve a lost recovery code or decrypt your data.

AutoFill

In Pwdx, open Settings → System AutoFill → Open AutoFill settings, then enable Pwdx in your system's password or AutoFill settings. The names of these system menus vary by OS version. System AutoFill works in supported apps and websites. For login entries, the on-device QuickType store holds only a domain, account name and random ID; choosing a suggestion requires Face ID, Touch ID or your device passcode. On iOS / iPadOS 18 or later, AutoFill → Pwdx in any text field inserts one chosen field, such as a card number. Bank cards are never offered in password AutoFill. Use system AutoFill for secure password fields. AutoFill and the Pwdx keyboard must be enabled separately.

Two-factor codes

Pwdx can keep two-factor (TOTP) codes with your logins, right next to the account and password, on iPhone, iPad and Mac. 1. Turn on two-factor authentication in a website’s security settings; the site shows a QR code. 2. In Pwdx, tap Add → 2FA Code. On iPhone and iPad you can scan the QR code with the camera; you can also pick a screenshot that contains it, or enter the setup key the site provides (a string of letters and numbers) or an otpauth:// link. 3. The code joins the matching login. Find it in the 2FA Code category and open the item to see the code, which refreshes every 30 seconds; tap it to copy. Moving from another authenticator: start from Settings → Import 2FA Codes, or “Import from Another App…” on the 2FA Code add screen. Pwdx reads Google Authenticator export QR codes (menu → Transfer accounts → Export accounts) and unencrypted Aegis or 2FAS backups, as well as text with one otpauth:// link per line; export encrypted backups unencrypted from the original app first. Codes you already saved are skipped, and logins whose account and name match get the code added. Check that the codes work on each site before deleting them from the original app. Turn on “Copy 2FA Code After Filling Password” in the 2FA Code section of Settings to copy the current code when AutoFill enters a password; it is cleared after 45 seconds. On iOS / iPadOS 18 and macOS 15 or later, the system can also suggest Pwdx codes above one-time-code fields. The camera is used only while scanning; frames are recognized on the device and never saved or uploaded. QR codes, screenshots and backup files are read only on your device. Code secrets are encrypted on the device, like passwords, before they sync to your iCloud.

Passkeys

Passkeys work on iPhone, iPad and Mac and require iOS / iPadOS 17 or macOS 14 or later. 1. Enable Pwdx AutoFill: on iPhone / iPad, open Settings → General → AutoFill & Passwords (on iOS / iPadOS 17: Settings → Passwords → Password Options); on Mac, open System Settings → General → AutoFill & Passwords. 2. Create a passkey on a website or app that supports it, then choose Pwdx in the system sheet. On the confirmation screen, verify with Face ID, Touch ID or your device passcode and tap Save. Pwdx then creates an ES256 (P-256) key pair on the device. 3. To sign in, choose the Pwdx passkey in the system sheet or a QuickType suggestion, then verify with Face ID, Touch ID or your device passcode. Pwdx decrypts only that one private key on the device to sign the site’s challenge; the private key is never shown, copied or exported, and never sent to us. In the app’s Passkeys category, view the site, user name and creation time, or delete passkeys individually; deletion syncs to other devices. A login entry for the same site indicates that a passkey for the site is already saved in Pwdx. Older app versions ignore passkeys. The site must support passkeys; Pwdx cannot add that ability to unsupported sites. If no synced key, unlockable device or recovery code is available, passkeys are lost along with passwords, and support cannot recover them.

Mac Quick Fill

Mac Quick Fill is macOS-only, for browsers and apps that don’t support third-party password AutoFill. It is off by default: nothing happens and no shortcut exists until you turn it on and record your own shortcut. Pwdx never opens the panel by itself. 1. In Pwdx, open Settings → Quick Fill and turn on “Enable Quick Fill”. 2. Click the shortcut button and record a shortcut containing ⌘, ⌥ or ⌃, such as ⌥⌘P. 3. Press the shortcut in the current app to open a small panel over it; verify with Touch ID or your Mac password, then choose an item and field, or “account ⇥ password” for logins. By default, the chosen value is copied to the clipboard, marked concealed / transient, and cleared after 45 seconds if unchanged. 4. To type directly, turn on “Type automatically” separately. Pwdx first explains the permission, then macOS asks for Accessibility permission; it is used only to type the value you just picked into the frontmost app as keystrokes. Without permission, Pwdx falls back to copying. Accessibility permission is optional and can be revoked anytime in System Settings → Privacy & Security → Accessibility. Pwdx does not read screen contents, other apps’ content or your keystrokes, never types without you picking an item, and never sends typed values anywhere. The global shortcut uses the standard system hot-key API and receives only Pwdx’s own shortcut, not other keystrokes. Pwdx stays in the menu bar, where you can open the main window, Quick Fill or lock; closing the main window also hides the Dock icon. “Open at login” is off by default; when on, Pwdx waits in the menu bar at login without opening a window; you can enable it and turn it off in Pwdx Settings or System Settings → General → Login Items. You can also turn off Quick Fill and “Type automatically” in Pwdx Settings. Passkeys cannot be used through Quick Fill, only through the system passkey sheet.

Pwdx keyboard

On iPhone or iPad, add Pwdx under system Settings → General → Keyboard → Keyboards → Add New Keyboard. Enable Full Access so the keyboard can read your vault. Without it, only basic input controls such as space, return and delete work; vault filling is unavailable. Unlock once in the keyboard with Face ID, Touch ID or your device passcode to start an unlocked session. You can also use Settings → Pwdx keyboard → Unlock keyboard now in Pwdx. Under Settings → Pwdx keyboard → Stay unlocked, choose a duration: 1 minute, 5 minutes, 15 minutes or 1 hour. The default is 5 minutes. The keyboard locks when the time expires. Locking the app or choosing “Lock keyboard now” also ends the session. Use system AutoFill for secure password fields. The keyboard shows entry names with buttons by type: account, password or notes for logins; host, username or password for servers; number, expiry or security code for cards, never the PIN.

Contact support and notifications

Open Settings → Contact support in Pwdx. Read the data disclosure and enable support to send questions or suggestions and read replies. Before you enable it, the app sends only anonymous device statistics, including device model, OS version, app version and notification permission state. These do not include your device name or vault data. Once enabled, support conversations are not end-to-end encrypted. Never send passwords, private keys or recovery codes. Open Feedback settings from the conversation toolbar to manage notifications, your device name, or “Disconnect and delete notification data”. Notifications are optional. You can use the vault and contact support without allowing notifications; open the app to check for replies.

Deleting your data

To delete your entire vault, open Settings → Delete Pwdx vault in Pwdx. Verify your identity with Face ID, Touch ID or your device passcode, verify your original recovery code, then confirm permanent deletion. Five incorrect code attempts lock code verification for 30 seconds. This removes the Pwdx vault from iCloud, deletes local keys and clears this device's support conversation. It cannot be undone. The next app launch creates a new vault. If you do not have the recovery code and want to delete your cloud data, use iOS Settings → Apple Account → iCloud → Manage Storage → Pwdx to remove Pwdx's iCloud data. This does not let you generate a new recovery code. To remove only this installation's support and notification data, open Settings → Contact support, then choose Feedback settings in the conversation toolbar → Disconnect and delete notification data. This deletes its support messages, replies and notification records without deleting your iCloud vault or other devices' support history. Turning off notifications or uninstalling the app alone does not automatically delete cloud data.

Privacy requests

Use the contact form below to request access to, correction of or deletion of information held by the support service, or to make another privacy request. Include a support request reference if you have one, and leave an email address if you would like a reply. For details of what is stored and how long it is kept, read the privacy policy at https://pwdx.0os.io/privacy. Never include passwords, private keys or recovery codes in the form, support conversations, screenshots or attachments.

FAQ

Can I download Pwdx now?

Yes. Pwdx is available through the App Store badge on this page. A US$1.99 universal purchase covers iPhone, iPad and Mac; it is not offered in mainland China. To try new versions early, join the public TestFlight beta under “Try new versions early” on this page.

Can I save long passwords and keys?

Yes. Pwdx supports long text, Unicode and multiline keys without cutting them to a typical short password limit. Capacity still depends on device storage, iCloud quotas and service limits.

Do I need a separate Pwdx account?

No. Your vault uses your own iCloud. Use the same Apple account on your devices, enable iCloud Drive and iCloud Keychain, and store your recovery code safely offline.

How do AutoFill and the keyboard differ?

System AutoFill works in supported apps and websites. For login entries, the on-device QuickType store holds only a domain, account name and random ID; choosing a suggestion requires Face ID, Touch ID or your device passcode. On iOS / iPadOS 18 or later, AutoFill → Pwdx in any text field inserts one chosen field, such as a card number. Bank cards are never offered in password AutoFill. The Pwdx keyboard on iPhone and iPad needs Full Access. Unlock once with Face ID, Touch ID or your device passcode in the keyboard, or unlock in the app. It stays unlocked for 1 minute, 5 minutes, 15 minutes or 1 hour; the default is 5 minutes. The keyboard shows entry names with buttons by type: account, password or notes for logins; host, username or password for servers; number, expiry or security code for cards, never the PIN.

Does Pwdx support passkeys?

Yes, on iPhone, iPad and Mac. Enable Pwdx in system AutoFill to save and use passkeys on supported sites or apps, and view or delete them under the Passkeys category.

Can Pwdx replace my authenticator app?

Yes. Pwdx keeps two-factor (TOTP) codes with your logins; add them by scanning, picking a screenshot or entering a setup key, or move them from Google Authenticator, Aegis and 2FAS. Code secrets are encrypted on your device before they sync to your iCloud and are protected by your recovery code like your passwords. Counter-based HOTP codes are not supported yet.

Why does Quick Fill need Accessibility permission?

It is needed only if you separately turn on “Type automatically”, solely to type the value you just picked into the frontmost app. It does not read screen contents, other apps’ content or keystrokes. Default copying needs no permission; revoke it anytime in System Settings → Privacy & Security → Accessibility, and Pwdx falls back to copying.

What can I save for SSH servers and bank cards?

Servers store a host or IP, port, username, password and/or private key with passphrase, purchase website and expiry date, which you can extend in one tap. Cards store the number, cardholder, expiry, security code, PIN, issuing bank and online-banking site. Card numbers are masked by default. All detail fields are encrypted on device with RSA-3072 + AES-256-GCM before syncing to your private iCloud database. Login and server account names are not encrypted at the app layer. Cards keep no unencrypted account name and are never offered in password AutoFill.

Do I have to use support?

No. Your vault works independently. You can enable support under Settings → Contact support and leave notifications off, then open the app to read replies. Before you enable support, the app sends only anonymous device statistics such as model, OS version, app version and notification permission state, with no device name or vault data. Support conversations are not end-to-end encrypted. Never send passwords, private keys or recovery codes.

When does the vault lock itself?

Choose 1, 5 or 15 minutes (5 by default) under “Auto-Lock When Idle” in Settings; the vault locks once you have not used Pwdx for that long. iPhone and iPad lock as soon as Pwdx goes to the background; the Mac locks when it sleeps, its screen locks or the user switches, but not when you only close the main window. Syncing and background refreshes never extend an unlock.

What if I change devices or lose my recovery code?

Use the same Apple account with iCloud Drive and iCloud Keychain enabled. On a new device, wait for your keys to sync or use your full recovery code. You cannot generate a replacement code without the original. If a device still unlocks your vault, keep using it and do not delete the app. If you have no usable synced keys, no device that can unlock the vault, and no valid code, support cannot decrypt the vault or retrieve the lost code.

How do I delete my data?

Open Settings → Delete Pwdx vault, verify with both Face ID, Touch ID or your device passcode and your original recovery code, then confirm deletion. This removes your iCloud vault, local keys and this device's support conversation; the next launch creates a new vault. Five incorrect codes lock code verification for 30 seconds. Without the code, delete cloud data through iOS Settings → Apple Account → iCloud → Manage Storage → Pwdx. To remove only this installation's support and notification data, use the conversation toolbar → Feedback settings → Disconnect and delete notification data. Use the support page form for other privacy requests.

Contact support

Pwdx
SupportFAQPrivacy简体中文

© 2026 Pwdx · A place for every important credential.

Apple, App Store and TestFlight are trademarks of Apple Inc. Pwdx is developed independently and is not affiliated with Apple Inc.